Pure Pool - taking over chemicals

Will be triple shocking with 5 or 6 gallons today.
Says PH is 7.6+should be 7.4, so adding muric acid.
CYA is at 50 or 60.
Says should run filter longer.

4 gallons Thursday eve

Pool still cloudy green with 2 gallons last Sunday.

2 speed pump wiring

Hard wired for either low or high speed:

White wire is for low speed.   Red wire is for high speed (disconnect white wire and connect red wire with L1).

7/24 - measured at Leslie's Danville:

FAC 10
TAC 10
CH 200
CYA 100
TA 100
PH 7.6
Copper 0
Iron 0
TDS 2900
Phosphates 200

7/25 Drained 715 CU FT or 5300 gallons

7/29 - measured at Leslie's Lafayette

FAC 5
TAC 5
CH 160
CYA 90
TA 80
PH 7.6
Copper 0
Iron 0
TDS 1600
Phosphates 300

More July Fun!

TDS approaching time to drain

7/5 2 gallons

July 7 2018

27 fc 
.5 cc
7.4 pH
70 ppm TA
220 cal hardness

July 9th
23 FC
.5 cc
TA 80 ppm

7/11 2 gallons before leaving town - wed eve.
7/18 Pool turning green - 2 gallons on Wed eve.
7/19 23 ppm chlorine and .5 combined chlorine
7/20 am algae still growing
7/20 2pm 2 gallons chlorine (out of 871, so could not measure)

More fun, got away from me

Sat Morn - power wash filter
Sat Eve - two gallons of Kemtek on Sat.

Sun Eve - 26ppm Chlor

Tue Eve 21ppm Chlor, 0 combined
7.3 ph
Still green - could be clearing

Possible red algae on first step

13.5 ppm chlorine - still green